Q. Which QED cable is best to use with a turntable?

• Related Articles

• Q. Are the MA28 and MA31 interchangeable, and can I use a turntable with the MA28?

  Answer: The MA28 was for adding a CD player to a Tuner input whilst also retaining the Tuner. It attenuates the CD output, so it won't overload the tuner input which is typically 300 mV sensitivity. If you also use this to connect a record player to ...

• Q. Which QED cable has "balanced design concept speaker cable" printed on it?

  Answer: A number of QED cables have carried the "QED balanced design concept speaker cable" printed on the jacket, these included the following:- Original Qudos Silver Qudos We'd advise taking a photo of the cable you have and then submitting it to ...

• Speaker Cable - Q. Should I use a dedicated bi-wire cable or two single cables when bi-wiring my loudspeakers?

  Answer The capacitance and inductance of a speaker cable depends on the separation of the two conductors. The nearer you place the two conductors together the higher the capacitance and the further away you place them from each other the higher the ...

• Professional LSZH Speaker Cable - Q. Can I install the speaker cable alongside power cables?

  Answer: Having them installed in this way won’t cause any problems with the audio; there will be plenty of 50 Hz hum induced in the cable, but it will all be sunk by the low output impedance of the amp. What does concern us, is the jacket insulation ...

• Q: Which QED optical cable is best for hi-res audio?

  Answer: When speaking of hi-res audio, the actual bit rate of 32-bit 192kHz is 12.28 Mb/s. QED's Performance Optical Graphite is a good cable, and will cope with this data rate, but for a jitter free presentation of audio signals this fast, you need ...