Q. What is the specification of the QED Micro Bi-Wire cable?

• Related Articles

• Speaker Cable - Q. Should I use a dedicated bi-wire cable or two single cables when bi-wiring my loudspeakers?

  Answer The capacitance and inductance of a speaker cable depends on the separation of the two conductors. The nearer you place the two conductors together the higher the capacitance and the further away you place them from each other the higher the ...

• XT25 Bi-Wire - Loudspeaker Cable Presenter

  Attached is the presenter for the QED XT25 Bi-Wire loudspeaker cable - launched October 2019.

• Q. What is the specification of my QED Micro cable?

  Answer: Type: Single Wire +/- conductors Conductor Section (mm2): 2 x 1.25 Conductor Material: 99.999% OFC Conductor dielectric: Polyethylene Loop Resistance (ohms/m): 0.0289 Parallel Capacitance (pF/m): 25.00 Loop Inductance (uH/m): 0.63 Dissipation ...

• Q. Are QED loudspeaker cables directional?

  Answer: No, our loudspeaker cables are not directional, but you should orientate them the same way on both channels, for example, the writing on the cable jacket/sheath gives the direction of draw of the conductors when manufactured, we advise the ...

• Supremus - Q. What are the benefits of bi-wiring using Supremus speaker cable?

  Answer: We have yet to introduce a bi-wire version of Supremus, but doubling up two single wires would have the effect of doubling capacitance and halving inductance and resistance. It won’t affect the dissipation factor, because that is a unit-less ...