Q. What is the specification of my QED Original cable?

• Related Articles

• Q. Are QED loudspeaker cables directional?

  Answer: No, our loudspeaker cables are not directional, but you should orientate them the same way on both channels, for example, the writing on the cable jacket/sheath gives the direction of draw of the conductors when manufactured, we advise the ...

• XT25 - Loudspeaker Cable Technical Paper and Specs

  Attached are technical and specification documents for the QED XT25 loudspeaker cable.

• Q. Which QED cable has "balanced design concept speaker cable" printed on it?

  Answer: A number of QED cables have carried the "QED balanced design concept speaker cable" printed on the jacket, these included the following:- Original Qudos Silver Qudos We'd advise taking a photo of the cable you have and then submitting it to ...

• Q. What is the specification of the QED Silver Anniversary cable?

  Answer: Type: Single Wire +/- conductors Conductor Section (mm2): 2 x 2.5 Conductor Material: Silver Plated 99.999% OFC Conductor dielectric: Polyethylene Loop Resistance (ohms/m): 0.0149 Parallel Capacitance (pF/m): 42.90 Loop Inductance ...

• Q. What is the specification of my QED Micro cable?

  Answer: Type: Single Wire +/- conductors Conductor Section (mm2): 2 x 1.25 Conductor Material: 99.999% OFC Conductor dielectric: Polyethylene Loop Resistance (ohms/m): 0.0289 Parallel Capacitance (pF/m): 25.00 Loop Inductance (uH/m): 0.63 Dissipation ...