Q. What is the specification of my QED Micro cable?

• Related Articles

• Q. Are QED loudspeaker cables directional?

  Answer: No, our loudspeaker cables are not directional, but you should orientate them the same way on both channels, for example, the writing on the cable jacket/sheath gives the direction of draw of the conductors when manufactured, we advise the ...

• Q. What is the specification of the QED Micro Bi-Wire cable?

  Answer: Type: Bi-Wire +/- -/+conductors Conductor Section (mm2): 4 x 1.25 Conductor Material: 99.999% OFC Conductor dielectric: Polyethylene Loop Resistance (ohms/m): 0.0289 Parallel Capacitance (pF/m): 32.43 Loop Inductance (uH/m): 0.73 Dissipation ...

• Q. What is the specification of my QED Original cable?

  Answer: Type: Single Wire +/- conductors Conductor Section (mm2): 2 x 2.5 Conductor Material: 99.999% OFC Conductor dielectric: Polyethylene Loop Resistance (ohms/m): 0.0145 Parallel Capacitance (pF/m): 40.00 Loop Inductance (uH/m): 0.58 Dissipation ...

• Speaker Cable - Q. Should I use a dedicated bi-wire cable or two single cables when bi-wiring my loudspeakers?

  Answer The capacitance and inductance of a speaker cable depends on the separation of the two conductors. The nearer you place the two conductors together the higher the capacitance and the further away you place them from each other the higher the ...

• Q. Which QED cable has "balanced design concept speaker cable" printed on it?

  Answer: A number of QED cables have carried the "QED balanced design concept speaker cable" printed on the jacket, these included the following:- Original Qudos Silver Qudos We'd advise taking a photo of the cable you have and then submitting it to ...