79 Strand - Q. How can I tell which core is positive/negative?
79 Strand - Q. How can I tell which core is positive/negative?
Answer:
If you run a finger over the two cores, you will notice that one of them has a rib/ridge on the outer jacket so that you can differentiate between them.
Please find attached a video tutorial on how to terminate QED Micro and Profile 42 Strand cables using QED Airloc termination. Note, QED Airloc crimping tool must be used, terminations and cable maybe slightly different from those shown in the ...
THE ULTIMATE EXPRESSION OF SOUND BORN FROM PURE SCIENCE The largest cross sectional area of pure copper ever incorporated into a QED loudspeaker cable, enables Supremus to deliver the ultra-low resistance required to ensure perfect fidelity of the ...
Answer: It is important to note that loop resistance per metre means that the conductor is actually two metres long (there and back again), so the quoted figure will always be at least twice that of the resistance per metre of a single conductor ...
Answer: Please be aware that you should snip the inner core x-tubes that run down the centre of each conductor, leaving the copper which can then be inserted into the plugs - please refer to the attached images.